Modular slatted walkway to create intersections and detours
Ideal for bathing establishments, camping sites and resorts
The product is made of impact-resistant thermoplastic material with high mechanical strength.
These staves also have the connecting tooth on the short side and are used to create “T” crossings or deviations on both the left and right sides.
Because of these features, it is possible to create stable platforms on which to place tables and chairs to create patios and living areas.
All slats have air vent holes to prevent floating and instability of the walkway once it is laid on the sand
IDEAL FOR THE FOLLOWING REASONS:
It has no gaps between the slats. This feature makes it suitable for the passage of baby carriages, strollers, crib carts and deck chairs.
For maximum safety, all corners are rounded and there are no metal inserts.
Assembles without the use of tools.
You can detach it every 25 cm and fold it back on itself 180°.
This feature facilitates end-of-season storage in a small space.
The product is treated against UV and salt spray.
Available in 90 and 100 cm. widths with white or blue conjunctions.
Rubber feet for porous surfaces (e.g., pool walkways)
Weight m / 100A (assembled product): 8.9 kg
Weight m / 90A (assembled product): Kg. 8
Raw slat material: 100% PP compound
Connection raw material: 100% PVC
Clasps raw material: 100% PA
Measurements of 100 A slat with inserted connection: mm. x1000x250x44h
Measurements of 90 A slat with inserted connection: mm. x900x250x44h
Weight of slat 100 A: 1.9 kg
90 A slat weight: 1.7 kg
Slats per linear metre: 4
Connection weight 100 A: 0.320 kg
Connection weight 90 A: 0.290 kg
Conjunctions per linear meter: 4
Clips per linear meter: 8
DIELECTRIC STRENGTH TEST – CERMET
LOAD RESISTANCE TEST – CERMET
CLIMATIC CHAMBER AIR CONDITIONING CYCLE – CERMET
AGING TEST – CERMET
DROP TEST WITH BALL – CERMET
